User manual

Bank C-6: Set Minimum Delay

Use the following steps to reset both the H Delay and V Delay values to 0 (zero).

1. Select Bank C, and rotate Function Select to position 6.

2. Reset all delays as required:

• Toggle Mode Select up to reset H Delay and V Delay to 0.

Bank Function Select Mode Select Heads-Up Display Label Default

C 6

+ Zero

- No action

MIN DEL ZERO N/A

Bank C- 7: Input Mode

The Input Mode function selects what type of video is being input. The choices are:

• Standard – standard

• VTR – input signals that do not have a stable timebase, such as VTRs

When VTR is selected as the video Input Mode, an external reference should be used to reclock the

output signal to the house reference.

Use the following steps to set the Input Mode:

1. Select Bank C, and rotate Function Select to position 7.

2. Select the desired Input mode according to the following table.

• Toggle Mode Select up to set VTR mode

• Toggle Mode Select down to set STANDARD mode.

Bank Function Select Mode Select Heads-Up Display Label Default

C 7

+ VTR mode

- STANDARD mode

IN MODE VTR

STAND

Note

When the Input Mode is set to VTR Mode, the Hotswitch

Mode will be forced OFF.

4-20 • Using Banks ADC-8032B User Manual (Iss. 02B)