User manual

Using Bank B Functions
The following topics are discussed in this section:
• Setup
• VI Blanking
• VI End
• SuperBlack
• V Bit Lock
Bank B-1: Setup
Use the following steps to enable or disable setup:
1. Select Bank B, and rotate Function Select to position 1.
2. Choose the desired setup value:
• Toggle Mode Select up to enable NTSC / PAL-M setup.
• Toggle Mode Select down to disable NTSC / PAL-M setup.
Bank Function Select Mode Select Heads-Up Display Label Default
B 1
+ On
- Off
SETUP ON
OFF
ON*
OFF**
* Indicates default NTSC / PAL-M setting
** Indicates default PAL-B / PAL-N setting
Bank B-3: VI Blanking
Use the following steps to blank the vertical interval, or allow the signals in the vertical interval to
pass through the ADC-8032B:
1. Select Bank B, and rotate Function Select to position 3.
2. Choose the desired blanking mode:
• Toggle Mode Select up to blank the vertical interval.
• Toggle Mode Select down to pass the vertical interval.
Bank Function Select Mode Select Heads-Up Display Label Default
B 3
+ Blank
- Pass Through
VI BLANK BLANK
PASS
PASS
4-12 • Using Banks ADC-8032B User Manual (Iss. 02B)