User manual

Bank A-C: C
B
Gain
Use the following steps to adjust the ADC-8032B’s output C
B
gain:
1. Select Bank A, and rotate Function Select to position C.
2. Adjust C
B
Gain up or down as required:
• Toggle Mode Select up to increase C
B
gain.
• Hold Mode Select up to increase C
B
gain continuously.
• Toggle Mode Select down to decrease C
B
gain.
• Hold Mode Select down to decrease C
B
gain continuously.
Bank Function Select Mode Select Heads-Up Display Label Default
A C
+ Increase
- Decrease
C
B
GAIN (###.#)%
100%
Note
C
B
Gain is one of the six “Proc Amp” controls that can be reset
using Factory Defaults (Bank A, position E).
Bank A-D: AGC
Use the following steps to enable or disable the Automatic Gain Control (AGC):
1. Select Bank A, and rotate Function Select to position D.
2. Choose the desired AGC state:
• Toggle Mode Select up to advance up the list.
• Toggle Mode Select down to descend down the list.
Bank Function Select Mode Select Heads-Up Display Label Default
A D
+ Both
Luma
Chroma
- Off
AGC BOTH
LUMA
CHROMA
OFF
OFF
Note
AGC is one of the six “Proc Amp” controls that can be reset
using Factory Defaults (Bank A, position E). Proc amp controls
will still affect the video output even if the AGC is on.
4-10 • Using Banks ADC-8032B User Manual (Iss. 02B)