User manual

Bank A-A: Chroma Gain
Use the following steps to adjust the ADC-8032B’s output chroma gain:
1. Select Bank A, and rotate Function Select to position A.
2. Adjust chroma gain up or down as required:
• Toggle Mode Select up to increase chroma gain.
• Hold Mode Select up to increase chroma gain continuously.
• Toggle Mode Select down to decrease chroma gain.
• Hold Mode Select down to decrease chroma gain continuously.
Bank Function Select Mode Select Heads-Up Display Label Default
A A
+ Increase
- Decrease
CHROMA (###.#)% 100%
Note
Chroma Gain is one of the six “Proc Amp” controls that can
be reset using Factory Defaults (Bank A, position E).
Bank A-B: Hue
Use the following steps to adjust the ADC-8032B’s output hue:
1. Select Bank A, and rotate Function Select to position B.
2. Adjust hue (in degrees) as required:
• Toggle Mode Select up to change the hue in a clockwise direction.
• Hold Mode Select up to change the hue clockwise, continuously.
• Toggle Mode Select down to change the hue in a counter-clockwise
direction.
• Hold Mode Select down to change the hue counter-clockwise,
continuously.
Bank Function Select Mode Select Heads-Up Display Label Default
A B
+ Increase
- Decrease
HUE (##.##) DEG. 0 DEG.
Note
Hue is one of the six “Proc Amp” controls that can be reset
using Factory Defaults (Bank A, position E).
ADC-8032B User Manual (Iss. 02B) Using Banks • 4-9