User manual

Using Bank A Functions
The following topics are discussed in this section:
• Heads-up Display
• Decode Mode
• Test Pattern
• Video Gain
• Black Level Offset
• Chroma Gain
• Hue
• C
B
Gain
• AGC
• Factory Defaults
• Lock/Unlock Switch Access
Important
The card defaults with switch access set to the locked position.
To unlock the access refer to the “Bank A-F: Lock/Unlock
Switch Access” section in this chapter before attempting to
make any adjustments.
Bank A-1: Heads-up Display
Use the following steps to enable or disable the Heads-up display:
1. Select Bank A, and rotate Function Select to position 1.
2. Choose the desired display mode:
• Hold Mode Select up for one second to enable the display.
• Hold Mode Select down to disable the display.
Bank Function Select Mode Select Heads-Up Display Label Default
A 1
+ (h) On
- Off
HEADS UP ON
OFF
OFF
Note
The display is superimposed over all ADC-8032B video
outputs. Do not use this feature with “on-air” signals.
4-6 • Using Banks ADC-8032B User Manual (Iss. 02B)