User manual

Bank A Function Table
Table 3. Function Select: Bank A Function Table
Function
Select
Function Mode Select Options
Heads Up Display On-
Screen Label and
Value
Default
Value
0 Bank Select
+ A
B
- C
BANK A
B
C
A
1 Heads-Up Display
+ (h) On
- Off
HEADS UP ON
OFF
OFF
2 N/A
3 N/A
4
Decode Mode
m
(NTSC)
+ 3 Line
- 3D Adaptive
DECODE 3 LINE
3D ADAPT
3D ADAPT
4
Decode Mode
m
(PAL)
5 Line DECODE 5 LINE
5 LINE
5 Test Pattern
+ Full Field Color Bars
SDI Check Field
- Off
TEST PAT FF BARS
PATH
OFF
OFF
6 N/A
7 N/A
8 Video Gain
m
+ Increase
- Decrease
VID GAIN (###.#)% 100.0% *
9 Black Level Offset
m
+ Increase
- Decrease
BLK OFF (##.#) IRE 0.0 IRE *
A Chroma Gain
m
+ Increase
- Decrease
CHROMA (###.#)% 100.0% *
B Hue
m
+ Increase
- Decrease
HUE (##.##) DEG. 0.00 DEG. *
C C
B
Gain
m
+ Increase
- Decrease
C
B
GAIN (###.#)% 100.0% *
D AGC
+ Both
Luma
Chroma
- Off
AGC BOTH
LUMA
CHROMA
OFF
OFF *
E Factory Defaults
+ (h) Reset All
- (h) Reset Proc Amp
DEFAULT ALL RST
PROC RST
N/A
F Switch Access **
+ Locked
- (h) Unlocked
ACCESS LOCKED
UNLOCKED
LOCKED
Note
Functions, as listed in the Function column as being stored in memory, always power up in the last
known state. All other items, however, power up in the default state, regardless of their previous state.
* Indicates Proc Amp controls that are affected by position E, Factory Defaults function.
** Locking Switch Access shuts off the Heads-up Display. Unlocking will not restore
the display if it was previously enabled. This must be performed manually.
m
Stored in non-volatile memory
ADC-8032B User Manual (Iss. 02B) Using Banks • 4-3