User manual

• Before making adjustments, choose the method that you wish to use. Two methods

are available:

1. No display - Adjustments are made using the Function Select and Mode Select

switches, without the assistance of the Heads-Up Display. Results should be

confirmed with test equipment suitable for measuring the parameter being

adjusted (such as a waveform monitor or vector scope).

2. Heads-Up Display - Adjustments are made using Function Select and Mode

Select switches in conjunction with the Heads-Up Display. Ensure that the

Heads-Up Display is enabled (Bank A, position 1). Note that the display is

superimposed over all ADC-8032B video outputs.

Operating Conventions For Function Tables

The following rules apply to the function tables that are used throughout this section:

• The label “ + ” instructs you to toggle the Mode Select switch (SW2) up

momentarily.

• The label “ - ” instructs you to toggle the Mode Select switch (SW2) down

momentarily.

• The label “ + (h) ” instructs you to hold the Mode Select switch (SW2) up for one

second.

• The label “ - (h) ” instructs you to hold the Mode Select switch (SW2) down for one

second.

Selecting Banks

Function Select switch functionality is divided into three banks of functions. Use the following steps

to select Bank A, B or C as required.

1. Rotate Function Select (SW2) to position 0. Note that position 0 is always used to

select the bank, regardless of the bank that you are currently using.

2. Toggle Mode Select (SW2) up or down to choose the desired bank. Three positions

are available: Bank A, B or C.

3. The table below illustrates each switch function, along with the Heads-Up Display

label, the Status LED indication, and the default value. If you are not using a

display, be sure to verify your selection on the Status LEDs.

Table 2. Switch and Bank Selection

Mode Select Heads-up Display Label Status LED Default Bank

+ A BANK A BANK A

B BANK B BANK B

- C BANK C BANK C

Function Tables

This section presents a detailed charting of all board-level ADC-8032B functions in the following

three tables. The operational usage is explained in the next section.

4-2 • Using Banks ADC-8032B User Manual (Iss. 02B)