User manual

Using Banks
In This Chapter
This section provides a detailed explanation on using Bank functions. The following topics are
discussed:
• General Operating Rules
• Selecting Banks
• Function Tables
• Using Bank A Functions
• Using Bank B Functions
• Using Bank C Functions
• Timing Modes
General Operating Rules
Please note the following important operating rules for the ADC-8032B:
• Whenever the card is powered up, it defaults to Bank A, and the Bank A LED is lit.
Note
The card defaults with switch access set to the locked position.
To unlock the access refer to the “Bank A-F: Lock/Unlock
Switch Access” section on page 4-11 in this chapter before
attempting to make any adjustments.
• For each of the supported video formats (NTSC / PAL-B / PAL-M / PAL-N) the
card stores the default or user-adjusted video settings independently in non-volatile
memory. The selection of settings is determined by the setting of J3 Input select,
the video standard jumper.
• Always check to see that the Input OK LED is lit. If not, check that the input is
valid. If a reference is used, check that the reference is valid and that the reference
standard matches the input standard.
ADC-8032B User Manual (Iss. 02B) Using Banks • 4-1