Manual

37www.rosscontrols.com
TURCK Modular Industrial I/O System BL 67
Electrical: • Operating Current: <30 mA from V
MB
(SSI)
<50 mA from V (all)
<100 mA from V supply
Power Distribution: • Inputs: V
I
• Logic: V
MB
and V
Material:
• Connectors: Nickel-plated brass
• Housing: PC-VO (Lexan)
Diagnostics (Logical): • Diagnostic information available through the fieldbus gateway
Diagnostics (Physical): • LED to indicate module bus communication status as well as I/O diagnostics
 • LEDs for each I/O point to indicate on/off status
Functional Description: • Connect up to 8 CANopen slaves to this module
 • Map the slaves into any available fieldbus
BL67-1CVI
3.583
(91.0)
1.654 (42.0)
1.260 (32.0)
I/O Data Map 1
Shown with
BL67-B-4M12 base
Input Connectors
2S
Mating cordset: RK 4.4T-*-RS 4.4T
Splitter: VBRS 4.4-2RK 4T-*/*
In
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Slave 2 Slave 1
2 Slave 4 Slave 3
3 Slave 6 Slave 5
Out
4 Slave 7 Slave 8
5 Slave 2 Slave 1
6 Slave 4 Slave 3
7 Slave 6 Slave 5
8 Slave 7 Slave 8
CANopen Interface Module
Inputs Data
Part Number Drawing Slaves Connectors Pinout Bytes/Slaves Max. Baud Rate
Group
Diagnostics
I/O Map
BL67-1CVI with BL67-B-1M12 A 8 0 2S 1 X X 1
Modular I/O • Fieldbus Independent Configuration • IP 67 Protection • Various I/O Styles