Owner manual

26 © 2012, ROSS CONTROLS
®
. All Rights Reserved.
Interposed Regulator Kit Ordering Code
Ordering Components
• ManifoldorSubbaseKitrequired.
• InterposedRegulatorKitcongured
forInternalPilotasstandard.
• OrdervalveasExternalPilot.
Internal Pilot Configuration -
PressureinBasePort1feedsregulatorconguredforInternalPilotwhichfeedsvalveconguredforExternalPilot.
External Pilot Configuration - Size 1, Size 2, Size 3
AnExternalPilotpressureinPort12or14ofthebasefeedsthrutheInterposedRegulator12or14galleydirectlytothe12/14pilotofthevalve.
 ThiscongurationtakesanExternalPilotfromthe12portofthebaseandpassesitthrutheregulatortofeedthe12galleyofthevalve.
How to Configure Interposed
Regulator / Valve Combinations
R PS5637 1 6 6 P
Basic Series
Size 00
15407-1, 18mm PS5637
15407-2, 18mm PS5638
Size 0
15407-1, 26mm PS5537
15407-2, 26mm PS5538
Regulator Function
Common Pressure Regulator 1
Independent Pressure Regulator 2
#4 Port Regulator / Gauge*
2 2-60 PSIG w/o Gauge
3 5-125 PSIG w/o Gauge
5 2-60 PSIG w/Gauge
6 5-125 PSIG w/Gauge
* For Common Pressure Regulator Option, Regulator Gauge callout
must be the same number for both Port #4 and Port #2. (Example: 166)
#2 Port Regulator / Gauge*
2 2-60 PSIG w/o Gauge
3 5-125 PSIG w/o Gauge
5 2-60 PSIG w/Gauge
6 5-125 PSIG w/Gauge
* For Common Pressure Regulator Option, Regulator Gauge callout
must be the same number for both Port #4 and Port #2. (Example: 166)
R PS4037 1 6 6 C P
Basic Series
Size 1
5599-1 PS4037
5599-2 PS4038
Size 2
5599-1 PS4137
5599-1 PS4138
Size 3
5599-1 PS4237
5599-1 PS4238
Regulator Function
Common Pressure Regulator 1
Independent Pressure Regulator 2
Selector Regulator 3
#2 Port Regulator / Gauge*
0** Line By-Pass Plate
1 1-30 PSIG w/o Gauge
2 2-60 PSIG w/o Gauge
3 5-125 PSIG w/o Gauge
4 1-30 PSIG w/Gauge
5 2-60 PSIG w/Gauge
6 5-125 PSIG w/Gauge
C Air Pilot w/60 PSIG Gauge
D Air Pilot w/160 PSIG Gauge
* For Common Pressure Regulator Option, Regulator Gauge callout must
be the same number for both Port #4 and Port #2. (Example: 166)
** Pressure Line By-Pass Option can only be used with Independent and
Selector Regulators (Option 2 & 3 in Interposed Block Function).
#4 Port Regulator / Gauge*
0** Line By-Pass Plate
1 1-30 PSIG w/o Gauge
2 2-60 PSIG w/o Gauge
3 5-125 PSIG w/o Gauge
4 1-30 PSIG w/Gauge
5 2-60 PSIG w/Gauge
6 5-125 PSIG w/Gauge
C Air Pilot w/60 PSIG Gauge
D Air Pilot w/160 PSIG Gauge
* For Common Pressure Regulator Option, Regulator Gauge callout must
be the same number for both Port #4 and Port #2. (Example: 166)
** Pressure Line By-Pass Option can only be used with Independent and
Selector Regulators (Option 2 & 3 in Interposed Block Function).
Accessories