Owner manual

16 © 2012, ROSS CONTROLS
®
. All Rights Reserved.
Size 2
Size 3
Size 1
Subbase Kits
Size 2
Size 3
Size 1
Manifold Kits
Manifold and Subbase Kit Ordering Code
Wiring Options
Blank None
C Chrysler
F SAE / Ford
G General Motors
Enclosures / Lead Length
7 3-Pin Mini Connector in Base
8* 4-Pin M12 Micro Connector in Base
9 5-Pin Mini Connector in Base
A 6" Leads
C Terminal Block
J
†
Circuit Board, Single Address
M
†
Circuit Board, Double Address
T* SAM Gen 3.0 Wiring
*ValveVoltageCode“B9”Only.
† Not Available with Subbase Kits.
Automotive Connectors
Mounted in 1/2" Conduit Port
 • 3-Pin-WiredforSingleSolenoid
 • 4-Pin/5-Pin-WiredforDoubleSolenoid
Automotive Connectors
 MountedinIndividualManifoldConduitCover
 • 3-Pin-WiredforSingleSolenoid
 • 4-Pin/5-Pin-WiredforDoubleSolenoid
Mounting Base Style / Port Size
Size 1
Subbase: 3/8 NPT Side Ports 15
Subbase: 3/8 BSPP Side Ports 16*
Manifold: 3/8 NPT End Ports 55
Manifold: 3/8 BSPP End Ports 56*
Manifold: 3/8 NPT Bottom / End Port 65
†
Manifold: 3/8 BSPP Bottom / End Port 66*
†
Note:
When using the Enclosure / Lead Length “J” or “M” option:
12VDC - Maximum number of coils is 13
24VDC - Maximum number of coils is 21
120VAC - Coils limited by the number of pins available in the connector
(25-Pin D-Sub = 24 coils, 19-Pin Brad Harrison = 16, 12-Pin M23 = 8)
240VAC - Must use “A” or “C” Option, Lead Wires or Terminal Blocks
R PS4011 55 A – C P
Basic Series
Size 1 PS4011
Size 2 PS4111
Size 3 PS4211
Size 2
Subbase: 1/2 NPT Side Ports 17
Subbase: 1/2 BSPP Side Ports 18*
Subbase: 1/2 NPT Bottom / End Port 27
Subbase: 1/2 BSPP Bottom / End Port 28
Manifold: 1/2 NPT Bottom / End Port 67
Manifold: 1/2 BSPP Bottom / End Port 68*
Size 3
Subbase: 3/4 NPT Side Ports 19
Subbase: 3/4 BSPP Side Port 10*
Subbase: 3/4 NPT Bottom / End Port 29
Subbase: 3/4 BSPP Bottom / End Port 20
Manifold: 3/4 NPT Bottom / End Port 69
Manifold: 3/4 BSPP Bottom / End Port 60*
Size 1, 2, & 3 Manifold / Subbase Kits
Plug-in, Series W65 (5599-2)
* BSPP ISO 1179 Specifications.
† #1 Bottom Port - 1/4".