Manualshelf

User Manual

ManualsBrandsRoss Controls ManualsAccessories for airINTEGRATED FILTER_REGULATOR
12345
50 © 2012, ROSS CONTROLS.
All Rights Reserved.
BANTAM Modular Integrated Filter/Regulator
FEATURES:
• Filter and regulator consolidated in a single assembly
• Modular assembly and mounting
• Threaded ports or quick-connect ttings for tubing up to 10 mm in diameter
• 5-micron rated polyethylene lter element
• High-strength polycarbonate plastic lter bowl; optional metal bowl
• Internal automatic drain; optional manual drain
• Piston-type regulator diaphragm-type
• Self-relieving regulator; optional non-relieving
• Pressure gauge
Ports: 1/8 & 1/4
Flow to 24 scfm
STANDARD SPECIFICATIONS (for products on this page):
Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C).
Metal bowl: 40° to 150°F (4° to 66°C).
Body, Dome and Knob: Acetal.
Bowl: 2-ounce (60-ml) capacity polycarbonate plastic;
optional aluminum bowl.
Filter Drain: Internal automatic drain; optional manual drain.
Filter Element: 5-micron rated polyethylene.
Fluid Media: Compressed air.
Inlet Pressure:
For automatic drain model:
With polycarbonate plastic bowl: 15 to150 psig (1.0 to 10.3 bar).
With metal bowl: 15 to 200 psig (1.0 to 13.8 bar).
For manual drain model:
With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar).
With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Outlet Pressure: Adjustable up to 100 psig (6.9 bar).
Pressure Gauge: 0 to 160 psig (0 to 11.0 bar);
1/8 NPT gauge ports front and rear.
Panel Mounting: 1-3/16 inch (30 mm) hole required.
Seals: Nitrile.
Threads: NPT standard, BSPP. For BSPP threads, add a
“C” prefix to the model number, e.g., C5D01C0110.
A
C
B
0
BAR
100 x kPa
psi
1
20
1
6
0
2
00
80
40
0
2
4
68
10
12
14
Port
DIMENSIONS inches (mm)
Weight †
Size A B* C Depth † lb (kg)
No Port 1.7 (43) 3.6 (92) 2.6 (67) 1.8 (45) 0.31 (0.15)
1/8, 1/4 3.0 (76) 3.6 (92) 2.6 (67) 1.8 (45) 0.53 (0.24)
Models below have quick-connect fittings for tubing.
1/4 3.4 (86) 3.6 (92) 2.6 (67) 1.8 (45) 0.51 (0.23)
3/8 3.9 (99) 3.6 (92) 2.6 (67) 1.8 (45) 0.51 (0.23)
4 mm 3.4 (86) 3.6 (92) 2.6 (67) 1.8 (45) 0.51 (0.23)
6 mm 3.4 (86) 3.6 (92) 2.6 (67) 1.8 (45) 0.51 (0.23)
8 mm 3.1 (79) 3.6 (92) 2.6 (67) 1.8 (45) 0.51 (0.23)
10 mm 3.9 (99) 3.6 (92) 2.6 (67) 1.8 (45) 0.51 (0.23)
*Dimension with plastic filter bowl; with metal bowl is 3.8 (97).
† Less gauge.
THREADED (Piston Type)
1/8 5D01C0110 5D01C0210 5D01C0310 5D01C0410
1/4 5D02C0110 5D02C0210 5D02C0310 5D02C0410
FITTINGS FOR TUBING
1/4 5D03C0110 5D03C0210 5D03C0310 5D03C0410
3/8 5D04C0110 5D04C0210 5D04C0310 5D04C0410
4mm 5D05C0110 5D05C0210 5D05C0310 5D05C0410
6mm 5D06C0110 5D06C0210 5D06C0310 5D06C0410
8mm 5D07C0110 5D07C0210 5D07C0310 5D07C0410
10mm 5D08C0110 5D08C0210 5D08C0310 5D08C0410
FITTINGS FOR TUBING (Diaphragm Type)
1/4 5D03C0120 5D03C0220 5D03C0320 5D03C0420
3/8 5D04C0120 5D04C0220 5D04C0320 5D04C0420
4mm 5D05C0120 5D05C0220 5D05C0320 5D05C0420
6mm 5D06C0120 5D06C0220 5D06C0320 5D06C0420
8mm 5D07C0120 5D07C0220 5D07C0320 5D07C0420
10mm 5D08C0120 5D08C0220 5D08C0320 5D08C0420
Port Plastic Metal Plastic Metal
Size Bowl Bowl Bowl Bowl
CONSOLIDATED FILTER & REGULATOR (piston type)
Automatic Drain Models Manual Drain Models
REPLACEMENT FILTER ELEMENT KIT
Element Rating/Type Kit Number
0.5-µm polyethylene - Standard 933K77
0
scfm
FLOW
l/s
02
20
psi
100
OUTLET PRESSURE
1.4
2.8
4.2
5.6
bar
7.0
Inlet Pressure: 91 psig (6.3 bar)
0
scfm
FLOW
l/s
0
00
510152025
10
DIAPHRAGM
PISTON
40
60
80
20
psi
100
OUTLET PRESSURE
1.4
2.8
4.2
5.6
bar
7.0
00
40
60
80
30
4 6 8 12
FLOW CHARTS
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
ISO Symbol
Filter/Regulator
Automatic Drain
Self-relieving
1
3
2
Tube Fittings

Summary of content (5 pages)