Manual

www.rosscontrols.com 63
FEATURES:
• Filter and regulator consolidated in a single assembly; wick-feed lubricator
• Inline mounting
• 5-micron rated polyethylene lter element
• High-strength polycarbonate plastic bowls or aluminum bowls
• Internal automatic lter drain; optional manual drain
• Piston-type regulator or diaphragm-type
• Self-relieving regulator; optional non-relieving
• Pressure gauge
• NPTF port threads; optional BSPP threads or ttings for tubing up to 10 mm
Ports: 1/8 & 1/4
Flow to 24 scfm
A
C
B
0
BAR
100 x kPa
psi
1
20
160
20
0
8
0
40
0
2
4
68
10
12
14
MINIATURE FRLs
Integrated Filter/Regulator plus Lubricator
STANDARD SPECIFICATIONS (for products on this page):
Ambient/Media Temperature:
With polycarbonate plastic bowl: 40° to 125°F (4° to 52°C).
Metal bowls: 40° to 175°F (4° to 79°C).
Bodies: Aluminum for filter/regulator and lubricator.
Bowls: 2-ounce (59.1-ml) capacity polycarbonate plastic bowls or
aluminum bowls.
Filter Drain: Internal automatic drain; optional manual drain.
Filter Element: 5-micron rated polyethylene.
Fluid Media: Compressed air.
Pressure Gauge: 0 to 160 psig (11.0 bar);
1/8 NPT gauge ports front and rear.
Inlet Pressure:
For automatic drain model:
With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar).
With metal bowl: 15 to 200 psig (1.0 to 13.8 bar).
For manual drain model:
With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar).
With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Oil Adjustment: Internal; tamper-resistant.
Outlet Pressure: Adjustable up to 100 psig (6.9 bar).
Panel Mounting: 1-3/16 inch (30 mm) hole required.
Regulator Dome and Knob: Acetal.
Seals: Nitrile.
Threads: NPT standard, BSPP. For BSPP threads, add a “C” prefix
to the model number, e.g., C5351C1006.
REPLACEMENT FILTER ELEMENT KIT
Element Rating/Type Kit Number
0.5 µm polyethylene - Standard 933K77
DIMENSIONS inches (mm) Weight
Bowl A B C Depth † lb (kg)
Plastic 3.7 (94) 3.6 (92) 2.6 (67) 1.6 (41) 0.66 (0.30)
Metal 4.0 (101) 4.3 (109) 2.6 (67) 1.6 (41) 0.66 (0.30)
† Less gauge.
COMBINATION FILTER & REGULATOR* (piston type) & Lubricator** (High Flow)
1/8 5351C1006 5352C1006 5351C1005 5352C1005
1/4 5351C2006 5352C2006 5351C2005 5352C2005
COMBINATION FILTER & REGULATOR* (diaphragm type) & Lubricator** (High Flow)
1/8 5341C1006 5342C1006 5341C1005 5342C1005
1/4 5341C2006 5342C2006 5341C2005 5342C2005
* Regulated pressure 0 - 100 psig (0 - 6.9 bar); gauge included.
** To order the lubricator with a quick-fill cap, change the third digit from the end of
the model number from “0” to “1,” e.g., model 5351C1006 with quick-fill cap becomes
model 5351C1106.
Port Automatic Drain Models Manual Drain Models
Size Plastic Bowl Metal Bowl Plastic Bowl Metal Bowl
PISTON TYPE
AIR FLOW DATA
See Flow Charts for individual assembly
components on preceding pages.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
ISO Symbol
FRL
Automatic Drain
Self-relieving
2
1