Instruction Manual

ManualsBrandsRoss Controls ManualsAccessories for airGENERAL PURPOSE REGULATORS

www.rosscontrols.com 33

FEATURES:

• Modular assembly and mounting

• Threaded ports or quick-connect ttings for tubing up to 10 mm in diameter

• Piston-type or diaphragm-type

• Self-relieving; optional non-relieving

• Pressure gauge

• NPTF port threads; optional BSPP threads or ttings for tubing up to 10 mm

• Adjusting knob is removable for tamper resistance

0510 15 20 25 30

Piston

Diaphragm

psig

100

OUTLET PRESSURE

bar

scfm

FLOW

l/s

0 246810 12 14

Inlet Pressure 100 psig (6.9 bar)

FLOW CHARTS

Ports: 1/8, 1/4, 3/8

Flow to 23 scfm

BANTAM Modular General Purpose Regulators

STANDARD SPECIFICATIONS (for products on this page):

Ambient/Media Temperature: 40° to 125°F (4° to 52°C).

Body: Acetal.

Dome and Knob: Acetal

Fluid Media: Compressed air.

Inlet Pressure: 150 psig (10.3 bar) maximum.

Outlet Pressure: Adjustable up to 100 psig (6.9 bar).

Pressure Gauge: 0 to 160 psig (0 to 11 bar); 1/8 gauge ports

front and rear.

Panel Mounting: 1-3/16 inch (30 mm) hole required.

Seals: Nitrile.

Threads: NPT standard, BSPP. For BSPP threads, add a “C”

preﬁx to the model number, e.g., C5B01C0010.

BAR

100 x kPa

psi

160

*For other regulated pressure ranges, change the next to last digit in the model number as indicated below:

0-50 psig (0-3.4 bar): Piston type: Change 1 to 3 Diaphragm type: Change 2 to 4

0-125 psig (0-8.6 bar): Piston type: Change 1 to 5 Diaphragm type: Change 2 to 6

Port

DIMENSIONS inches (mm)

Weight †

Size A B C Depth † lb (kg)

No Port 1.7 (43) 2.6 (67) 0.5 (13) 1.8 (45) 0.21 (0.09)

1/8, 1/4 3.0 (76) 2.6 (67) 0.5 (13) 1.8 (45) 0.43 (0.19)

Models below have quick-connect ﬁttings for tubing.

1/4 3.4 (86) 2.6 (67) 0.5 (13) 1.8 (45) 0.21 (0.09)

3/8 3.9 (99) 2.6 (67) 0.5 (13) 1.8 (45) 0.21 (0.09)

4 mm 3.4 (86) 2.6 (67) 0.5 (13) 1.8 (45) 0.41 (0.18)

6 mm 3.4 (86) 2.6 (67) 0.5 (13) 1.8 (45) 0.41 (0.18)

8 mm 3.1 (79) 2.6 (67) 0.5 (13) 1.8 (45) 0.41 (0.18)

10 mm 3.9 (99) 2.6 (67) 0.5 (13) 1.8 (45) 0.41 (0.18)

† Less gauge.

1/8 0-100 (0-6.9) 5B01C0010 — 5B01C0020 —

1/4 0-100 (0-6.9) 5B02C0010 5B03C0010 5B02C0020 5B03C0020

3/8 0-100 (0-6.9) — 5B04C0010 — 5B04C0020

4mm 0-100 (0-6.9) — 5B05C0010 — 5B05C0020

6mm 0-100 (0-6.9) — 5B06C0010 — 5B06C0020

8mm 0-100 (0-6.9) — 5B07C0010 — 5B07C0020

10mm 0-100 (0-6.9) — 5B08C0010 — 5B08C0020

Port Pressure* Pipe Tube Pipe Tube

Size psig (bar) Ports Fittings Ports Fittings

Regulated Piston Type Models Diaphragm Type Models

IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.

ISO Symbol

Regulator

Self-Relieving Non-Relieving

Summary of content (6 pages)

PAGE 1
BANTAM Modular General Purpose Regulators Ports: 1/8, 1/4, 3/8 Flow to 23 scfm FEATURES: • Modular assembly and mounting • Threaded ports or quick-connect fittings for tubing up to 10 mm in diameter • Piston-type or diaphragm-type • Self-relieving; optional non-relieving • Pressure gauge • NPTF port threads; optional BSPP threads or fittings for tubing up to 10 mm • Adjusting knob is removable for tamper resistance A 12 0 80 6 C 8 4 10 40 160 2 12 0 14 0 20 BAR 1 0 0 x k Pa psi Port 0 B Siz
PAGE 2
MINIATURE Regulators & Relief Valves Ports: 1/8 & 1/4 Flow to 40 scfm FEATURES: • Inline mounting • Piston-type or diaphragm-type • Self-relieving; optional non-relieving • Pressure gauge • Adjusting knobs are removable making the regulators tamper-resistant ISO Symbol Regulator Self-Relieving Non-Relieving Port DIMENSIONS inches (mm) Size A B C Depth † A FLOW CHARTS 12 0 80 Inlet Pressure 100 psig (6.
PAGE 3
MID-SIZE Regulators Ports: 1/4, 3/8, 1/2 Flow to 100 scfm FEATURES: • Modular or inline mounting • Piston-type design • Self-relieving; optional non-relieving • Pressure gauge • Adjustment knob is removable for tamper-resistance A C 12 0 80 6 8 4 10 Reverse-Flow Regulators are also available. They provide regulated in-to-out pressure control, plus quick exhausting from out-to-in.
PAGE 4
FULL-SIZE Regulators Ports: 1/4, 3/8, 1/2, 3/4 DIMENSIONS inches (mm) Type A B* C** Depth † Flow to 155 scfm Weight † lb (kg) Gen. Purp.Reg. 3.5 (89) 5.8 (146) 1.3 (33) 2.8 (71) 2.06 (0.92) Precision Reg. 3.5 (89) 4.2 (106) 1.3 (33) 2.8 (71) 2.06 (0.92) Rem. Pilot Reg. 3.5 (89) 2.4 (62) 1.3 (33) 2.8 (71) 2.06 (0.92) FEATURES: • Modular or inline mounting • Diaphragm-type design * Dome removal clearance: add 0.63 (16). • Self-relieving; optional non-relieving ** Cap removal clearance: add 0.5 (13).
PAGE 5
MD4TM Modular General Purpose Regulators Ports: 3/8, 1/2, 3/4 Flow to 220 scfm FEATURES: • Modular or inline mounting; modular mounting allows regulators to be positioned at increments of 45° for ease in adjustment • Self-relieving diaphragm design, with large diaphragm sensing ratio • Non-relieving - optional • Pressure adjustment locking key; tamper-resistant pressure setting • Reverse flow - optional A 12 80 6 C 0 8 4 10 40 160 2 12 0 14 20 0 BAR 1 0 0 x k Pa psi 0 B ISO Symbol Regulator
PAGE 6
HIGH-CAPACITY Regulators Ports: 3/4, 1, 11/4, 11/2 Flow to 800 scfm FEATURES: • Inline mounting • Piston-type design • Self-relieving; optional non-relieving • Pressure gauge • Pressure adjustment locking key Reverse-flow regulators provide regulated in-to-out pressure control, plus quick exhausting from out-to-in. Used for applications, such as weld guns, requiring quick exhausting through the regulator. Piston type design.