User guide

www.rosscontrols.com 77
Regulator Mounting Brackets
Regulators and integral filter/regulators can be mounted
to a surface with a bracket that attaches to the regulator.
Brackets and mounting nuts can be ordered separately or
in a kit which includes both bracket and mounting nut.
Modular Mounting Brackets
Two L-shaped metal brackets as shown at the right can be used for wall mounting of modular
FRLs or Clean Air Packages. A single bracket can be used to mount individual filters or lubricators.
Kits include two brackets and four screws for attaching the brackets to the modules.
Kit Dimensions inches (mm)
Usage Number A B C D
BANTAM - Mounts with long screws that extend through end plates,
number 859K77 (two required).
MID-SIZE & FULL-SIZE 915K77 3.0 (76) 0.88 (22) 1.00 (25) 1.20 (31)
Nipple Kit Dimensions inches (mm)
Size Number A B C
1/4 887K77 2.72 (28) 0.50 (13) 1.00 (25)
3/8 888K77 2.72 (28) 0.50 (13) 1.00 (25)
1/2 889K77 2.72 (28) 0.50 (13) 1.00 (25)
3/4 890K77 3.69 (94) 1.13 (29) 1.25 (32)
1 891K77 3.69 (94) 1.13 (29) 1.25 (32)
A
B
C
Part Numbers Dimensions inches (mm) Panel Mounting Hole
Usage Kit Bracket Nut A B C D E Diameter inches (mm)
MINIATURE 873K77 872K77 874K77 1.375 (35) 1.125 (29) 0.31 (8) 0.31 (8) 0.69 (17) 1.19 (30)
MID-SIZE 876K77 875K77 877K77 2.38 (60) 1.00 (25) 1.50 (38) 1.56 (40)
MD4
TM
& FULL-SIZE 879K77 878K77 880K77 2.38 (60) 1.00 (25) 1.50 (38) 2.06 (52)
B
C
A
D
E
MINIATURE
A
B
C
MID-SIZE & MD4
TM
A
B
C
MID-SIZE, & FULL-SIZE
Mounting Accessories
FRL Inline Mounting Pipe Brackets
Two pipe brackets can be used for wall
mounting of FRL assemblies that use
pipe nipples to join the components. The
bracket kits listed below include two sets
of brackets.
Bracket Assembly Kit for HIGH-RELIEF Pilot
Operated Regulator
High-Relief Pilot Operated Regulator with 1/4- thru 1¼ inch
ports can be mounted to a vertical surface using the bracket
assembly kit listed below.
Bracket Assembly Kit
Model Number R-A37-381