User Manual

Printed in the U.S.A. – Rev. 10/12 © 2012 ROSS CONTROLS
®
. All Rights Reserved. Form NPS035
WARRANTY and CAUTIONS
Standard ROSS warranty and cautions apply, available upon request or at
www.rosscontrols.com
ROSS EUROPA GmbH
Germany
Fax: [phone]
[e-mail]
ROSS ASIA
®
K.K.
Japan
Fax: [phone]
[e-mail]
ROSS UK Ltd.
United Kingdom
Fax: [phone]
[e-mail]
ROSS SOUTH AMERICA Ltda.
Brazil
Fax: [phone]
[e-mail]
ROSS CONTROLS
®
INDIA Pvt. Ltd.
India
Fax: [phone]
[e-mail]
DIMAFLUID s.a.s.
France
Fax: [phone]
[e-mail]
ROSS CONTROLS (CHINA) Ltd.
China
Fax: [phone]
[e-mail]
ROSS CONTROLS
®
U.S.A.
Customer Svs. 1-800-GET-ROSS
Technical Svs. 1-888-TEK-ROSS
www.rosscontrols.com
Referenced Standards
All standards are subject to revision. Parties are encouraged to investigate and apply the most recent editions of the standards indicated below.
Various Safety-related Standards that Apply to Air Systems:
ANSI/ASSE Z244.1-2003 (R2008) – Lockout/Tagout Control of Hazardous Energy
OSHA 29 CFR 1910.147, ANSI B11.0-2010, RIA 15.06, ISO13849 – Machine Safeguarding
ANSI/PMMI B155.1-2010 – Safety Requirements for Packaging Machinery
ANSI B11.1 – Safety Requirements for Mechanical Power Presses
ANSI B11.2 – Safety Requirements for Hydraulic Power Presses
ANSI B11.3 – Safety Requirements for Power Press Brakes
ANSI B11.19-2010 – Performance Requirements for Safeguarding (Stop Time)
ANSI B11.TR6-2010 – Safety Control Systems for Machine Tools
OSHA 29 CFR 1910.211-219 – Safeguarding Mechanical Power Presses
Conversion Kit
ROSS Controls standard poppet solenoid pilot controlled valves for line
mounting can be easily field-converted into an explosion-proof solenoid
pilot poppet valve.
Listed on the right are the conversion kit part numbers to replace the
obsolete ROSS explosion proof pilot, or to convert a standard in-line valve
to an explosion-proof valve.
Applicable Requirements
C22.2 No. 0-10 - General Requirements - Canadian Electrical Code, Part II
CSA C22.2 No. 25-1966 - Enclosures for use in Class II Groups E, F and G Hazardous Locations
CSA C22.2 No. 142-M1987 - Process Control Equipment
C22.2 No. 213-M1987 - Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
CAN/CSA E79-0-95 - Electrical apparatus for explosive atmospheres, Part 0: General requirements
CAN/CSA E79-18-95 - Electrical apparatus for explosive atmospheres, Part 18: Encapsulation "m"
Part Number
1/4" - 1" OT (Overtap) 2370K77W
1" - 2½" 2371K77W