User's Manual

netAqua
TM
USER MANUAL Roslen Eco-Networking Products
v1.0.03 © 2014 by Roslen Eco-Networking Products. All rights reserved Page 43 of 59
i. WiFi interface enabled (check)
ii. SSID
iii. Security
1. Type
2. Key
iv. Static or DHCP IP address assignment
v. IP address (used for Static address)
vi. Network mask of the connected network
vii. Gateway IP address (must be provided when Static address is used).
viii. MAC address, provided for reference and not editable.
c. HTTP port number (typically set to 80).
2. Aliases:
a. netAQUA alias
b. Cycle alias for each watering cycle
c. Zone alias for each zone valve.
3. Monitoring inputs:
a. Local temperature sensor installed (check)
b. Local rainfall sensor installed (check)
c. Internet temperature and humidity enabled (check)
d. Internet temperature and humidity location:
i. State, city
ii. Zip code
iii. Latitude, longitude
iv. Weather Underground Station ID
e. Degrees F or degrees C selection.
4. Time and Date settings:
a. Localization for time zone
b. Month, day, and year drop down menus
5. Clock settings:
a. AM/PM or 24 hour type clock selection
b. Hour and minute drop down menus
6. Enable Network Time Protocol to obtain date and time from an Internet server (check)
7. LCD display:
a. Continuous operation enable (check)
8. Security (Browser Interface access protection):
a. User ID (case sensitive)
b. Password (case sensitive)