User's Manual

netAqua

USER MANUAL Roslen Eco-Networking Products

6. Time and Date:

o Time: hour, minute, second, in AM/PM or 24 hour format

o Date: month, day, year

7. Uptime: days, hours, minutes, seconds since last device power-up

8. netAQUA model, serial number, software application version, software bootloader version

information.

The Last Watering indication and the Next Watering indication are not shown while a cycle is active.

These update when the current watering cycle ends.

3.8.1.2. Watering Settings Page

The Watering Settings page includes all watering control settings for the netAQUA.

3.8.1.2.1. Global Watering Settings

The global controls provided for watering control include:

1. System Master Watering Control: Enable, Disable

2. Slope:

a. Enable (check)

b. Watering breaks: number (1 to 5)

c. Break duration: minutes (1 to 120).

3. Local temperature:

a. Enable (check)

b. Threshold: degrees F (60 to 120 in one degree increments), or degrees C (15 to 50 in

one degree increments)

c. Extra watering for each zone: percentage (5 to 70 in 5 percent increments).

4. Local rainfall:

a. Enable (check)

5. Internet temperature and humidity:

a. Enable internet temperature (check)

b. Temperature threshold: degrees F (60 to 120 in one degree increments), or degrees C

(15 to 50 in one degree increments)

c. Extra watering for each zone: percentage (5 to 70 in 5 percent increments).

d. Enable internet humidity (check)

e. Humidity threshold: percentage (60 to 100 in one percentage increment)

f. Reduced watering for each zone: percentage (5 to 70 in 5 percent increments).

6. Freezing temperature protection:

a. Enable (check)

b. Threshold temperature below which watering is automatically disabled (degrees F from

14 to 50, or degrees C from -10 to 10).

The Slope, Local temperature, Local rainfall, and Internet temperature and humidity controls are only

provided in the Browser Interface. The Enable watering cycle and Watering timer controls are