User's Manual

netAqua
TM
USER MANUAL Roslen Eco-Networking Products
v1.0.03 © 2014 by Roslen Eco-Networking Products. All rights reserved Page 32 of 59
Right click on the network interface that you would like to change and select properties on the pop-up
menu. On the new menu that opens, select Internet Protocol Version 4 (TCP/IPv4) and click the
Properties button.
Figure 30: Select Properties for IPv4
Select the “Use the following IP address” radio button to configure the computer’s IP address manually.
Next, you’ll need to select and provide an IP address for your computer that is in the same subnet as the
netAQUA. In our example, the netAQUA is 192.168.1.46, and the computer address can be anything
from 192.168.1.0 to 192.168.1.255, except for 192.168.1.46. Let’s choose 192.168.1.1, with the mask left
at the default value of 255.255.255.0.