User's Manual

netAqua

USER MANUAL Roslen Eco-Networking Products

2.2.3. Use the netFINDER Application

The Resource CD that came with your netAQUA contains a folder named netFINDER. This is a Windows

application that locates all netAQUA devices on your computer network. This program can be a very

convenient way to access one or more netAQUA controllers on your network. Simply copy the folder, or

its contents, to any location on your hard disc. There is no installation required, but you must copy all

three files contained in that folder to the same folder/directory on a computer that has access to your

network.

Once the application and the two related files are copied, simply launch netFINDER by double clicking it.

netFINDER will locate all netAQUAs on your network and will show them in a table. You can refresh the

search results by selecting View/Refresh, or pressing the F5 key on your computer keyboard. When the

netFINDER finds your device(s), all you need to do is double click the name of the device, which will open

the Browser Interface in your default browser.

The netFINDER is a Windows application, which has been tested on Windows XP, Vista, 7, and 8.

2.2.4. Connect the netAQUA to your WiFi Network

If you purchased the WiFi version of the netAQUA, you may want to connect it to your WiFi network. In

order to do this, you first need to have an established connection over Ethernet to the netAQUA Browser

Interface, which is covered in the earlier sections.

Once you have access to the Browser Interface, select the System Settings tab, which will open to the

Network Settings section. The group of settings that define the netAQUA’s WiFi operation are labeled

WiFi Port.