User's Manual

netAqua

USER MANUAL Roslen Eco-Networking Products

Figure 7: System Status Page

Note that in some circumstances you might see the IP address 192.168.1.46. This means that the

netAQUA did not receive its network address from the router controlling your computer network. The

device is set-up to request its IP address from the router by default, so if it does not, then most likely there

is a problem with the way you connected the netAQUA to the router or the switch. Please verify that the

Ethernet cable is securely connected into the netAQUA and the back of the router or switch. The two

LEDs on the Ethernet connector in the netAQUA should light/blink green (left LED) and light yellow (right

LED).

Once you note the IP address of your netAQUA, simply type that number into the Address bar of your

favorite browser and press Enter to display the Browser Interface Status page.

Figure 8: Browser Interface Status Page

Now you are ready to navigate the Browser Interface and configure your netAQUA.

Note that we have tested the Browser Interface with more recent versions of the following browsers:

• Internet Explorer

• Firefox

• Chrome

• Safari