User's Manual

netAqua
TM
USER MANUAL Roslen Eco-Networking Products
v1.0.03 © 2014 by Roslen Eco-Networking Products. All rights reserved Page 13 of 59
Figure 5: Status LED (top), WiFi LED (bottom), Control Pushbuttons
Figure 6: LED and Control Pushbutton Labelling
At this point, there are three ways to proceed with identifying the network address (IP address) of the
netAQUA and connecting to the Browser Interface:
• Check the device IP address on the LCD display
• Type the name of the device in your browser address bar
• Use the netFINDER application to find the netAQUA on your network.
2.2.1. Device IP Address on the LCD
Push either the Scroll Up or the Scroll Down button to change the LCD to the System Status page. The
IP address of your netAQUA will be identified on the line starting with IP Eth, and will look something like
the example shown in the image below.