Quick Start Guide

netAQUA
TM
9D QUICK START GUIDE Roslen Eco-Networking Products
v1.0.03 © 2014 by Roslen Eco-Networking Products. All rights reserved Page 4 of 4
8. If you are connecting to your network via Ethernet, feed the Ethernet cable through the cable
grommet on the bottom of the enclosure.
9. Feed the zone control wires through the cable grommet on the bottom right of the enclosure.
Cut to length, strip and connect the colored wire from each watering zone pair to the
appropriate Zone terminal. Connect the white common wires from each watering zone control
cable to the Common terminals. Wires can be organized and bundled along the right side of
the enclosure with the zip ties included in the netAQUA package.
10. Plug in the 24VAC power supply.
11. The netAQUA is now ready to control your irrigation system.
More detailed installation and operation instructions are provided in the User Manual that is
included on the Resource CD. We recommend checking for the latest updates to software, the
User Manual and other documentation on the Roslen Eco-Networking Products website at
http://roslen.com.