Wireless TV Headphones User Manual TH11 201-00-EJ-TH11-V1
CONTENTS PACKAGE CONTENTS Package Contents ------------------------------------------------------ 1 Product Overview ------------------------------------------------------- 2 LED Indicators Guide -------------------------------------------------- 3 Charge the Headphones ---------------------------------------------- 4 Headphones Transmitter Power on / off ------------------------------------------------------------ 4 Using the Headphones ------------------------------------------------ 5 Technical Spec
PRODUCT OVERVIEW LED INDICATORS GUIDE Headphones Headphones LED indicators Pairing mode Connected The signal indicator on the right ear cup stays blue. Low Battery The signal indicator on the right ear cup flashes blue and you hear a beep every 10 minutes until the headphones turn off automatically. Charging The charging indicator on the left ear cup stays red. Power Button Volume + Volume 3.
CHARGE THE HEADPHONES USING THE HEADPHONES 1. Plug the Type-C end of the USB cable into the charging port on the left ear cup. Wireless TV headphones Operation mode 2. Plug the USB-A end of the USB cable into a USB wall charger (DC 5V/1A) or computer that is powered on. There are two methods to connect the transmitter to TV Method 1: Connect the Transmitter to a TV with 3.5mm Audio Cable Method 2: Connect the Transmitter to a TV with USB-C Cable.
Connect the Transmitter to a TV with 3.5mm Audio Cable ❸ Turn on the transmitter, and then ❶ Plug the type-C end of the USB cable into the DC 5V/DATA IN port on the the signal indicator on the transmitter flashes white. transmitter, plug the USB-A end into the USB wall charger (included) and connect the charger to a power source. TV Back Power Source ❷ Connect one end of the 3.5mm audio cable to the AUX IN port of the transmitter and the other end to your TV's audio output port.
Connect the Transmitter to a TV with USB-C Cable ❶ For some new TV, the USB port has a digital audio signal output which can be connected to the transmitter by plug the type-C end of the Charging cable into the DC 5V/DATA IN port, no need to connect the power adapter and 3.5mm audio cable. TV Back TECHNICAL SPECIFICATIONS ● Operating Voltage: 5V/1A ● Audio Latency Time: <28mS ● Up to 100 feet/30 meters (open area) ● Charging Time: About 3.
FAQs IMPORTANT SAFETY INSTRUCTIONS Q: No sound comes from headphones, what should I do? A: Please check the LED white light on the transmitter stays on, if not, try it as ● Use of headphones will impair your ability to hear other sounds. Use caution while using your headphones when you are engaging in any activity that requires your full attention. follow: ● Make sure the transmitter's power adapter is connected to a power source ● Make sure the transmitter is turn on.
WARRANTY We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty to all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices. CARE AND MAINTENANCE Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
