2U SERVER CHASSIS RSV-Z2600 User Manual
U SERVER CHASSIS RSV-Z2600 User Manual Contents Product Overview ...............................................................................................................................................2 Feature.......................................................................................................................................................... 4 Specification .....................................................................................................................
2U SERVER CHASSIS RSV-Z2600 Product Overview 2 User Manual
2U SERVER CHASSIS RSV-Z2600 3 User Manual
2U SERVER CHASSIS RSV-Z2600 User Manual Introduction RSV-Z2600 is a 2U rackmount server chassis for various kinds of server computer which supports up to 9.6 x 9.6 Micro-ATX and smaller form factor motherboard design and PS2 power supply. Feature z z z z z Carries a total of 4x internal 3.5" HDDs or 3x Internal 3.5” HDD + 1x Internal 2.5” HDD Cooling design carry up to front 3x 80 mm front cooling fans (all are included in RSV- Z2600). Special design for add-on cards in the system (4 pieces max).
2U SERVER CHASSIS RSV-Z2600 User Manual Installation Guide Top Cover Disassembly 1. Remove the screws from each side of the Chassis. (two on each side) 2. Once the screws removed, push the top cover to remove from the chassis.
2U SERVER CHASSIS RSV-Z2600 User Manual Motherboard, PSU, and HDD Installation 1. Due to the limited space of the 2U chassis, please follow our recommended steps when installing Motherboard, Power Supply, and HDD for RSV-Z2600. 2. After remove the top cover, please remove all HDD cage. 3. Now, you can place a Micro-ATX Motherboard into the chassis, and fasten the screws.
2U SERVER CHASSIS RSV-Z2600 User Manual 4. After installing the Motherboard, you can follow by installing the Power Supply. 5. To Install Power Supply, you press the Power Supply against the rear of the Chassis, and fasten the screws on the four corners. 6. You can then connect all cables for the PSU and Motherboard. 7. After lock the HDD on to the cage, You can then install the cage onto the Chassis, from Left to Right.
2U SERVER CHASSIS RSV-Z2600 User Manual 8. For the HDD Cage on the right side, it can take up to 2x 3.5” HDD or 1x 3.5”HDD + 1x 2.5” HDD. You can place the Cage vertically when you are using a standard ATX PS2 power supply (140x150x86mm) 9. You can also place the HDD Cage horizontally if you uses longer ATX power supply (165x150x86mm) Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.
