SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Contents Product Overview............................................................................................................................... 2 Introduction ................................................................................................................................. 3 Feature ....................................................................................................................................
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 Product Overview 2 User Manual
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Introduction RSV-L4411 is a 4U rackmount industrial Hot-swap chassis for various server computers which supports any E-ATX (12” x 13”) and smaller form factor motherboards. It holds PS2 power supply which provides customers with wider selection and more affordable choices depending on the system design purposes.
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Installation Guide Top Cover Disassembly 1. Remove the screws from each side of the Chassis. (two on each side) 2. Once the screws removed, push the top cover to remove from the chassis.
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Hard Drive Tray Assembly / Disassembly 1. Each HDD Tray has a press button for releasing the hinge. To remove the HDD Tray; first press the button (red circle). 2. Upon press the button, the HDD tray will be easily pull out. 3. To slide in the HDD tray, please make sure to push the tray all the way into the module until a click sound indicating that the arm was fixed into the module. Hard Drive Installation Installing a 3.5” HDD 1.
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual 2. Once align, you can fasten the screws on both side of the tray to fix the HDD. (Please make sure that the connector of the HDD is facing outward) Installing a 2.5” HDD 1. To install a 2.5” HDD, please make sure that the 2.5” HDD is align with the screw holes on the tray 2. Once align, you can fasten the screws on the tray to fix the HDD.
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Hot Swap Module Cable Installation Server Rail Installation 1. In order to install the rail, you must first remove the cover on the side. Three screws locate on each side. 2. 7 Unscrew all three screws on each side.
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual 3. Upon removing the side bar, you will find several screw holes for you to install the server rail. Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.com for complete warranty information and future support for your product.
