FCC ID: W6R-SAROSC740S Bluetooth & Noise Cancellation Headphone Instruction manual Thank you for purchasing this Bluetooth & Noise Cancellation headphone. Please read the instructions and warnings carefully before use to ensure safe and satisfactory of this product.
Caution Please charge your battery if you can’t turn on the headphone Please turn off your headphone after use to keep a longer battery life Please use USB cable included in the package for battery charging Please don’t change any other battery Please don’t keep headphone in a wet place Do not exposure or toss headphone into fire.
7, Mic 8, 3.5mm jack port 9, ANC indicator Specifications Bluetooth Solution: CSR 8635 Bluetooth version: V5.0 Support agreement: A2DP, AVRCP, HFP, HSP Operating distance: 10M Battery: 500mAh Charging time: about 3 hours Charging current: 400MA Play time: 35 hours Driver Unit: Ø40mm Sensitivity: 105dB/1mW(S.P.L at 1KHz) Impedance: 32Ω Frequency Range: 20Hz-20KHz Rated Power: 10mw Max. Power: 20mw Battery charging Battery：rechargeable Polymer Lithium-Ion Battery，DC：3.
Press and hold the bluetooth button for 3 seconds to put the headphone in paring mode (In pairing mode the LED light will flash red and blue) Go into the Bluetooth settings on your device and search for new Bluetooth devices and select SAROS C740S. The LED light will blink blue once the headphone is successfully paired. . Notes: If the pairing is not successful, please turn the headphone off and on and then try to pair again..
Statement： 1) FCC 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2）FCC 15.21 Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 3) FCC 15.
