ENCLOSURE RX-35MV Series User’s Manual
ENCLOSURE RX-35MV Series User Manual Foreword Congratulations on purchasing of USB enclosure series product. It is to show you a new storing concept with safety and convenience. It is our pleasure to give you the best solution on removing the storage equipment and enhancing your data’s reliability in PC system or MAC system. Before using the product, please follow all of procedure of the manual to use the product correctly.
ENCLOSURE RX-35MV Series User Manual Setup mode under Windows 98/SE Driver should be setup when firstly using the product, then plug-play available. The below is an example for setup procedure under Windows98/SE system: 1. Take out the USB Enclosure, then pull out the inner case and take the inner cover away. 2.
ENCLOSURE RX-35MV Series User Manual y For new HDD: Before connecting USB Enclosure, please partition and format your HDD into FAT16 or FAT32. If your HDD partition is NTFS, UNIX, please let your HDD be FAT16 or FAT32 before connecting USB Enclosure .Furthermore, USB HDD in PC system is available in Mac system; USB HDD in Mac system is not available in PC system, please make it to be PC partition y USB can provide a rated 5V/500mA power to USB device . For 2.
ENCLOSURE RX-35MV Series User Manual 4. Follow the partition wizard. 5. If you want to use it on many different OS including Mac, we recommend FAT 32. Mac OS Mac OS 9.2 and before does not support creating partitions on an external drive. To do that, you have to purchase additional software. Initializing is no problem on all operating systems. For OSX use the Disk Utility to format and create partitions on your external disk. 1. Select “Disk Utility” in the Utilities folder 2.
