SERVER RSV-Z4000 USER Manual
User Manual SERVER RSV-Z4000 INDEX Introduction 02 Specifications 02 Top Cover Disassembly 03 5.25" Device Installation 03 3.
User Manual SERVER RSV-Z4000 Introduction: RSV-Z4000 RACKMOUNT CHASSIS The RSV-Z4000 is a 19" rackmount industrial grade server PC, which is designed for extended ATX form factor server board and can be equipped with PS2 power supply or mini-redundant power supply. In addition, the RSV-Z4000 has a large-scale fan filter and a easy-to-use knob key for great serviceability of the system. Specifications: • Construction: Heavy-duty 1.2mm steel chassis • Disk Drive Capacity : - Right / Left(Standard) : 5.
User Manual SERVER RSV-Z4000 Top Cover Disassembly 1.Release the thumb screws of the top cover 2.Slide back the lop cover and lift up 1 2 5.25” Device installation (A) 5.25” cage disassemblly 1.Release the screws of the cage 2.Lift up the cage 1 2 (B) Dismount the front cover plate 1 1.Release the screws of the metal cover 2.
User Manual SERVER RSV-Z4000 (C) CD-ROM installation 1.Place CD-ROM in the disk cage 2.Affix the CD-ROM to the disk cage with screws 1 2 3.Place the disk cage back to the case 3 (D) Other device installation 2 1.Place D340 in the disk cage 1 2.
User Manual SERVER RSV-Z4000 (E) HDD&FDD installation in 5.25” device cage a. 1.Fix the HDD bracket with HDD first 2.Place HDD set in the disk cage 3.Affix the HDD bracket to the disk cage with screws 2 1 b. c. 1.Place FDD in the lower disk cage 2.Affix the FDD to the disk cage with screws 1.Place HDD in the lower disk cage 2.Affix the HDD to the disk cage with screws 2 2 1 1 (F) Slim CD-ROM installation 1.Place slim CD-ROM in the lower disk cage 2.
User Manual SERVER RSV-Z4000 3.5” Device installation (A) 3.5” cage Dismount 1.Release the screws from 3.5” cage 2.Pull out and dismount the 3.5” cage 1 2 (B) Metal cover plate dismount 1.Release the screws of metal cover plate 1 2 2.Dismount the cover plate from 450 angle (C) 3.5” device installation 2.Mount the 3.5” cage with screws 1.Place FDD into the 3.
User Manual SERVER RSV-Z4000 Fan filter replacement 1.Pull out the filter bracket and remove the used filter 2.Replace with new fan filter 3.Mount the filter bracket 3 Fan replacement installation (A) 12cm fan replacement 1.Release the screws from fan bracket on 5.25” device cage 2.Pull out and remove the fan from cage 3.Replace with the new fan 2 1 (B) 8cm fan replacement 1 2 1.Remove the 8cm fan from fan holder 2.
User Manual SERVER RSV-Z4000 Motherboard installation (A) Interface card bracket installation 3 1.Release the screws from bracket 2.Remove the bracket from 450 angle (B) Motherboard installation 1.Affix the standoffs on the M/B base 2.
User Manual SERVER RSV-Z4000 (C) Interface installation 1.Plug the interface card to the motherboard slot 1 2.Affix the interface card bracket to the case by screw 1 2 3.
User Manual SERVER RSV-Z4000 4.Affix the hold sown clamp with thumb screws 2 Power supply installation 1 1.Place the power supply into the case 2 2.
User Manual SERVER RSV-Z4000 USB cable instructions: Pin-Connection of USB cable 1. Please check before installation, you can use the USB-Station on your Motherboard. Please take a look on the manual of your Motherboard and search the note “option 4 x USB”. You see on the motherboard a connector for the USB-Cable. It’s not so important how many pins you can see, lot of manufactures have a different design for the USB connector. 2. Each pins has a function.
www.rosewill.com Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.
