User manual

4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G User Manual

1) Target Name – The GUI will ask that you enter a “new” name for reference (the previous

RAID configuration will be displayed until the procedure is complete). The name can be

changed after the array has been fully expanded / migrated.

2) Specify the Cache policy (Write Back is default).

3) Specify the block size (note: not available for all controller models – check the product

documentation).

4) Select the existing RAID disks, and the disks you wish to add to the array.

5) Specify the capacity. Maximum (all available space assigned to the array) is default.

6) Click “Create” to start the expansion/migration process.

4. The Web GUI will notify you when the process starts. A progress bar will be displayed under the

Status column of the Manage-Array menu.