User manual

Allowing idle disks to spin down minimizes the power consumption of the system’s
storage devices.
In addition to saving energy, spinning down unused disks reduces mechanical wear and
the buildup of waste heat, which in turn, can greatly prolong the life of the system’s
storage hardware, over the long-term.
Click on the drop down menu provided for “Spin down idle disk (minutes)”, and select
a time (in minutes). This determines when Host Adapter will power down idle hard
disks.
Click the “Submit” button to activate this feature.
SAF-TE – This setting is related to the system chassis. The RR622 models do not
support this option.
Listeneing Port – This item is the card’s port address. 7402 is the default setting.
Password – Use this feature to change the Administrator’s password. The default
password is “hpt”.
4.13 Web GUI - Event Notification
The RocketRAID RR622 host adapters will record Administrator activity or RAID
related errors to the Web GUI’s Event Log. Data recorded to the event log is classified as
an “event”. From the toolbar, click “Event”.
The Event Log records and presents three types of “Events”:
Information: Information data includes all general user/administrator activity
(creating/deleting arrays, configuring spares, rebuilding arrays, configuring event
notification and maintenance tasks, etc.).
Warning: Warning data includes alerts issued by the Host Adapter (SMART/SHI
warnings including temperature and sector alerts, unresponsive hard disks,
unsynchronized parity due to a verification failure, etc.)