User manual

4.10 Web GUI - Recovering an Array
When a redundant array’s status is ”Critical”, fault tolerance is disabled. The array is can
be used in this format, but should be rebuild as soon as possible. If a Spare disk was
configured, the RocketRAID 620 will use this disk to automatically rebuild the array. If a
spare is not available, the array can be rebuilt manually.
If Auto-Rebuild is enabled, simply install a new disk – the RocketRAID 620 will
initialize the drive, and initiate the rebuild process. If the setting is not enabled, follow
the steps below.
4.10.1 To rebuild an array:
1. Click “Maintenance” towards the right of the target array.