User manual

Use the arrow keys to highlight the Array Name option and press Enter. The array name
dialogue box will appear. Use the keyboard to input a new Array Name, and press the
Enter key.
Note: the Array Name command is optional – it is not necessary to name the array. The
array can be named at a later time, and the name of the array can be changed at any time.
3. On the Create menu, use the arrow keys to highlight the Select Devices item and
press Enter. A device list will appear, and display all available hard disk drives.
4. Highlight the target disks that you want to use, and press Enter to select them. A
numeral will be displayed before each selected disk. This number designates disk