User manual

Once the RocketRAID host adapter and hard drives have been installed into the chassis,
boot-up the system to verify that the hardware is properly recognized.
1. Power on the system. If the system detects the presence of the adapter, the
RocketRAID BIOS Utility will be displayed during boot up.
2. Press Ctrl+H to access the RocketRAID BIOS Utility.
The BIOS Utility will display information about hard disks attached to the adapter. Make
sure all attached disks are detected by this utility. If any of the hard drives are not
detected, power down the system and check the cable connections to both the card, and
enclosure.
2.4 RocketRAID BIOS Utility
The RocketRAID RR622 card will display it's BIOS screen during the system's boot
process.
Press Control + H when prompted, to access the BIOS settings Menu.
2.4.1 BIOS SETTINGS OVERVIEW
The RocketRAID RR622 BIOS utility is an interface that provides management
commands and controller related settings.