User manual

2.2 Installing the RocketRAID RR622 Host
Adapter
Note: Make sure the system is powered-off before installing the RocketRAID RR622
host adapter.
1. Open the system chassis and locate an unused PCI-E (2.0 or 1.0) x1, x4, x8 or x16
slot.
2. Remove the PCI slot cover.
3. Gently insert the RocketRAID RR622 into the PCI-E slot, and secure the bracket to
the system chassis.
4. After installing the adapter, attach the SATA cables to the RocketRAID 62x’s
SATA ports, and to the hard disks.
5. Close and secure the system chassis.
2.3 Verifying Installation