Server RSV-R26 User Manual
Server RSV-R26 User Manual A list of mounting parts M4 Screw cap x 10 Washers x 10 Round-capped Phillips Screws x 10 Installation manual X 1 “L” Brackets x 4 M4 x 6L Screws x 18 M5 x 8L Screws x 18 Latches x 4 Slide rails x 2 Step 1 Take the sliding rail apart by sliding out the center slide. Outer slide rail Locking clip Center slide rail Attention: You will see a locking clip at the middle point of the center slide.
Server RSV-R26 User Manual Step 2 Install the center slide to both sides of the chassis, then secure the center slides with M4*6L screws. The rackmount chassis To pull it out of the cabinet Front-end Back-end M4 x 6L Screws Center slide rail x 2 Attention: 1. Put the center slide right next to the chassis. Align the center slide holes to the chassis＇mounting holes and install all 3 screws for each slide. 2. From all the way out of the cabinet, the rail has front and back sections.
Server RSV-R26 User Manual Step 4 (type1) Install the latches onto the front-side of the pillar of a rackmount cabinet. Use M5 x 8L screws to secure the L brackets onto the latches (4 places). Please align the screw holes on the pillar with the screw holes on the brackets. Attention: 1. Adjust the brackets according to the width of the cabinet. 2. Make sure to align the 2 slide rails on the rackmount and secure the brackets on to the outer slide rails via screws. 3.
Server RSV-R26 User Manual Step 5 Install the chassis with center slides to the cabinet by sliding into the outer slides. 1. Pull the outer slide all the way until it reaches the limit. 2. Install the chassis with center slides to the cabinet by sliding into the outer slides. In order to successfully push in, please pull up the locking clips.
Server RSV-R26 User Manual 3. Use M5 square locking nuts that come with the cabinet and M5 Round-capped Phillips screws to secure the chassis to the rackmount cabinet.(4 places) Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.
