SERVER RSV-L4000 User Manual
SERVER RSV-L4000 User Manual Contents Product Overview .......................................................................................... 2 Introduction............................................................................................. 3 Feature..................................................................................................... 3 Specification ........................................................................................... 3 Installation Guide................
SERVER RSV-L4000 User Manual Product Overview 2
SERVER RSV-L4000 User Manual Introduction RSV-L4000 is a 4U rackmount industrial chassis for various kinds of server computer which supports any E-ATX (12” x 13”) and below form factor motherboard design and PS2 power supply. In addition, RSV-L4000 has a large-scale fan filter and easy-to-use knob key for great serviceability of the system. Feature Carries 8 x internal 3.5" HDD and 3 x 5.25" devices (which can switch to a 3.5” HDD x 4 module) totally.
SERVER RSV-L4000 PIC User Manual ITEM PURPOSE MOTHERBOARD STANDOFF x 12 MOTHERBOARD SCREWS x 6 POWER SUPPLY SCREWS x 20 MOTHERBOARD PIC 4 ITEM PURPOSE RAIL x 6 HDD MODULE ODD RAIL Buzzer x 1 (PC Speaker) MOTHERBOARD
SERVER RSV-L4000 User Manual Installation Guide Top Cover Disassembly 1. Remove the screws from each side of the Chassis. (two on each side) 2. Once the screws removed, push the top cover to remove from the chassis.
SERVER RSV-L4000 User Manual 3.5” Device Installation 1. First press the two round shape button using your thumbs, then use your index finger to push the 3.5” module to remove it. 2. Pull the module out from the front. 3. Pull the HDD tray out from the module to begin installation.
SERVER RSV-L4000 User Manual 4. The HDD tray can be easily clipped onto 3.5” HDD. 5. To complete the 3.5”HDD installation, push the HDD tray back into the module, then push the module back to the chassis.
SERVER RSV-L4000 User Manual Server Rail Installation 1. In order to install the rail, you must first remove the cover on the side. Three screws locate on each side. 2. Unscrew all three screws on each side. 3. Upon removing the side bar, you will find several screw holes for you to install the server rail.
SERVER RSV-L4000 User Manual 5.25” ODD Installation 1. First press the two round shape button using your thumbs, then use your index finger to push the middle 3.5” module to remove it. 2. Pull the middle module out from the front panel 3. Using a flathead screw driver to press the Yellow circle to move the front panel out.
SERVER RSV-L4000 User Manual 4. Press the ODD rail onto both side of the ODD. 5. You can slide the ODD back in to complete the installation. Make sure the round shape button has locked with the ODD rail. You can also remove the ODD by pressing the button, then pull out.
SERVER RSV-L4000 User Manual Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.com for complete warranty information and future support for your product.