Installation guide

50
Display the connected camera(s) in N x N grid view mode,
supporting up to 32 cameras.
Display the live view of the selected camera in full screen mode.
Press the ESC key on the PC keyboard to resume the Main
window.
Automatically switch the live view of each connected cameras in
single camera view mode by 30 seconds*. Click once to start
and click again to stop.
* The auto-switch time is set as 30 seconds by default, which
can be changed by clicking the  System Setting and
then change the value from the pull-down list of the Auto
Switch time interval option.
 System Information displays the system information, including the date and time,
and the available storage space of the system.
 Live View Status provides the status of live view mode, including Camera List and
eMap.
 Camera List displays the status of the connected cameras. If multiple
cameras are connected, you can switch to the live view of each camera by
simply selecting the camera from the list.
 eMap allows you to select the desired camera to the view from the map easily.
Please note that you have to set up the eMap for monitoring in advance.
 Camera Control Buttons provides the control buttons that allow you to control the
selected camera.
Button
Function
Talk On/Off. Click to enable/disable the speaker function of
the connected camera. This option is available only in single
camera view mode.
Listen On/Off. Click to enable/disable the microphone