Installation guide

49
 Live View Window displays the live video of the connected camera(s).
 Quick Launch Buttons are located below the Live View Window, providing you with
the following quick-launch functions:
Button
Function
Click to select Logout or Close UltraView Pro.
Click to select Restore Recording Type, All Continuous
Recording, or Stop All Recording.
Click and then select to display the View Setting window, switch
to the eMap View window, or check the Camera Status.
Click to display the Playback window.
Click to display the Schedule Configuration window.
Click to configure the event settings: Event Server, Address
Book, and Event Trigger.
Click to configure Device Setting and Recording Setting.
Click to set the Account, Language, and System Setting; or
view the Version or the program.
 Camera View Mode buttons in this area allow you to switch the camera view mode.
Button
Function
Display the connected camera(s) in single camera view mode.
Display the connected camera(s) in quad view mode.
Display the connected camera(s) in 3 x 3 grid view mode.
Display the connected camera(s) in 13-camera view mode using
a split window. The first camera is displayed as the major view.
Display the connected camera(s) in 17-camera view mode using
a split window. The first camera is displayed as the major view.