Installation guide

39
- Profile Name: Display the profile name that you select in the Schedule Profiles
list.
- Weekdays: Select the weekday(s) that you want to separately assign in the
schedule profile. The weekday that has been assigned will be displayed with
green color.
- Time List: Display the time period that you have assigned within the selected
weekday. To assign the same time period to every weekday, click Add this to
all weekdays; click Delete this from all weekdays to remove the selected time
period from every weekday. Click Delete to remove the selected time period.
- Start/End Time: Enter the start and end time and then click Add to assign a
time period within in the selected weekday.
Event Configuration >> Motion Detect Trigger
Select the Enable option to enable the trigger function of the camera, so that you can
send captured images within the detecting area to the FTP server, or email receiver.
You have to configure corresponding settings, such as FTP server and email server, to
enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down list.
- Action: Select the destination that the captured images will be sent to: Send
Email, or FTP Upload.