Installation guide

36
Event Server Setting >> Email
 Email
- SMTP Server Address: Enter the mail server address. For example, mymail.com.
- Sender Email Address: Enter the email address of the user who will send the
email. For example, [e-mail].
- SMTP Port: Assign the SMTP port in the text box. The default SMTP port is 25. If
the mail server requires an encrypted connection, you should check the SSL
option. STARTTTLS is an extension to plain text communication protocols. It
offers a way to upgrade a plain text connection to an encrypted (TLS or SSL)
connection instead of using a separate port for encrypted communication.
- Authentication Mode: Select None or SMTP according to the mail server
configuration.
- Sender User Name: Enter the user name to login the mail server.
- Sender Password: Enter the password to login the mail server.
- Receiver #1 Email Address: Enter the first email address of the user who will
receive the email.
- Receiver #2 Email Address: Enter the second email address of the user who
will receive the email.
- WAN IP Change Notification: Select the option to enable the system to notify
you when the WAN IP address changed.