Installation guide

Network >> Wireless >> WPS Setting (for wireless model)

WPS (Wi-Fi Protected Setup) sets a new standard of Wi-Fi security, providing a

simplified secure network setup solution for the end users. WPS can be enabled by the

following two options:

1. PIN Mode

2. PBC Mode (or WPS button on the device, depending on hardware design)

 PROTECTED SETUP

Press the Reset to Unconfigured button to reset the WPS configuration of the

camera.

 WPS

- PIN Mode: The PIN (Personal Information Number) mode builds the connection

by entering the PIN Code directly.

a. Click the PIN Mode option.

b. Click Site Survey button to select the router (or access point) you want to

connect.

c. Click the Connect button to start WPS function of the camera.

d. You need to enter the PIN Code displayed on the camera to the router (or

access point) within 120 seconds to complete the setup.