Installation guide

Enter the IP address of the camera. The default

setting is 192.168.0.30.

Subnet Mask

Enter the Subnet Mask of the camera. The default

setting is 255.255.255.0.

Default Gateway

Enter the Default Gateway of the camera. The

default setting is 192.168.0.1.

Primary/

Secondary DNS

DNS (Domain Name System) translates domain

names into IP addresses. Enter the Primary DNS

and Secondary DNS that are provided by ISP.

- PPPoE: Select this option when you use a direct connection via the ADSL

modem. You should have a PPPoE account from your Internet service provider.

Enter the User Name and Password. The camera will get an IP address from

the ISP as starting up.

NOTE Once the camera get an IP address from the ISP as starting up, it automatically

sends a notification email to you. Therefore, when you select PPPoE as your

connecting type, you have to set up the email or DDNS configuration in advance.

 DDNS Setting

With the Dynamic DNS feature, you can assign a fixed host and domain name to a

dynamic Internet IP address. Select the Enable option to enable this feature. Then,

select the Provider from the pull-down list and enter the required information in the

Host Name, User Name, and Password boxes. Please note that you have to sign up

for DDNS service with the service provider first.

 UPnP

The camera supports UPnP (Universal Plug and Play), which is a set of computer

network protocols that enable the device-to-device interoperability. In addition, it

supports port auto mapping function so that you can access the camera if it is behind

an NAT router or firewall. Select the Enable option to enable this feature.

 Ports Number

- HTTP Port: The default HTTP port is 80.

NOTE If the camera is behind an NAT router of firewall, the suggested to be used is

from 1024 to 65535.