Installation guide

14
3.2 Accessing to the Camera
Whenever you want to access the camera:
1. Since the default configuration of the camera is DHCP mode enabled, you are
recommended to launch IPFinder to search the IP address that is assigned to the
camera by the DHCP server, and then click Link to access the camera via the Web
browser.
2. If Network Camera can't get IP Address under DHCP mode, the default IP Address
will be 192.168.0.30.
3. When the login window appears, enter the default User name (admin) and
password (admin) and press OK to access to the main screen of the camera’s
Web Configuration.
NOTE If you are initially access to the camera, you will be ask to install a new plug-in for
the camera. Permission request depends on the Internet security settings of your
computer. Click Yes to proceed.
Enter the User name
and Password.