Installation guide

13
Chapter 3
Software Installation
3.1 IPFinder
The camera comes with a conveniently utility, IPFinder, which is included in the
Installation CD-ROM, allowing you to search the camera on your network easily.
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the
Auto-Run program.
2. Click the IPFinder item to launch the utility. The control panel will appear as below.
3. Once you get the IP address of the camera, launch the Web browser or UltraView
Pro to access your camera.
Display the connected
camera(s)
Double click to link the
camera
Click About
to get the Version information of IPFinder.
Click
Link to connect the selected camera.
Click
Change IP
to modify the IP address of the selected camera.
Click
Search to find the IP address of the connected camera(s).
Click Exit to close the utility.