Installation guide

11
2.2 Connecting the Camera to LAN/WLAN
Use the p your local area network (LAN).
When you connect provided Ethernet cable
to connect the camera to the AC power
adapter, the camera is powered on
automatically. You can verify the power
status from the Power LED on the front
panel of the camera.
Once connected, the Link LED starts
flashing green light and the camera is on
standby and ready for use now.
Connecting the Ethernet Cable
When the camera is powered on, the camera will automatically search any
access point with “default” SSID.
NOTE
(For wireless model) If the camera cannot to your wireless network, you need to install
the camera in LAN and proceed with WLAN settings.