User manual

8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
8
3. DVR Installation
 Connect the camera video output to the DVR video input port with BNC connectors.
The camera install coaxial cable is suggested RG59 or above.
 DVR Network installation
Please connect DVR to HUB or router by using RJ-45 network cable and make sure
the DVR network indicator LED is on.
(Please refer to Network Setup for further network setting information of using static IP,
PPPoE or DHCP.)
 Alarm Installation
Please refer to Installation for external alarm I/O installation. Please refer to Alarm
Setup.
 Speed Dome Installation
This device can support 3 kinds of communication protocol (Pelco D, Pelco P &
MIKAMI)
 Power Installation
Please use the provided power cable and adaptor to connect the DVR
(AC100V~AC240V). Please refer to Installation for connecting position. The DVR
system will enter into live viewing mode when power is connected. Please refer to
Display Setup - Live Viewing Mode for more information.
OSD switching between VGA and BNC is automatic.
If you found the monitor is working, but the front panel and USB
mouse are locked up.
Press and hold the “fast forward” button on the remote for 5 seconds
to switch OSD setting.