User manual

8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual

Reference Network environment for Static IP situation

Direct connection:

DVR to PC

(Home/Small office

users)

Multi-connection

through

HUB/SWITCH/Router

(Small Office users)

Here is an example of how to set up connection between the DVR and your PC.

Step 1: Set your DVR network mode to static mode

1. Change the connection type to “STATIC” in DVR’s network setting

2. Assign the IP address to the DVR

Note: Be sure not to set up a duplicated IP address for the DVR. For example, if you assign

192.168.0.100 to the PC, please change the IP address of the DVR to 192.168.0.101

3. Set the Netmask of the DVR: The address must be the same as the PC’s setting.

4. Set the Gateway of the DVR: The address must be the same as the PC’s setting.