User manual

8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual

12.3 How to setup the Network step by step.

Decide your network environment

In Network setting, you can choose the connection type from Static, DHCP, or PPPoE (which

allow you to dial up by ADSL modem or 3G dongle). Below is an explanation of how you can

configure your DVR to fit your network environment.

12.3.1 Static:

Each network device has its own IP address. An IP address is like a doorplate of the device,

helping data to be delivered to the correct destination. An IPv4 address contains 32 bits,

which are divided into four parts, each part separated by a dot, such as 255.255.255.0.

The following three blocks of the IP address space are reserved for private Internets (local

networks):

• 10.0.0.0~10.255.255.255

• 172.16.0.0~172.31.255.255

• 192.168.0.0~192.168.255.255

In Static mode, you have to assign the IP address for each device (e.g. your DVR and PC)