User manual

8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual

 F/W update

Please plug the USB memory stick into the USB port on the DVR rear panel

after download the new firmware to the USB memory stick.

Note: the firmware only can be upgraded by using the USB port. Please don’t operate the

system, remove the USB memory stick or remove the power while it is in upgrade

progressing in order to prevent any serious system error. The system will automatic reboot

after upgrade.

 Load Setup Default

Load factory default. Refer to [Default Setting].

 Reboot the DVR

Reboot the DVR.

 ShutDown

System will close the recording file. Please remove the power line manually.